What’s the Right Replacement Chain for a Husqvarna Chainsaw?

This Savior set is the most Husqvarna-specific chain in the batch, cut in .325 pitch with a .043 gauge and 59 drive links for the 535iXP, and it also lists fitment for Milwaukee and DeWalt cordless saws. You get two chains per pack, which is the smart way to buy chain anyway since you want a sharp spare ready while the other goes on the file. The thin .043 gauge runs on the lighter battery and homeowner saws, so double-check your bar groove before ordering. At half off it’s the cheapest way onto a known-good loop.

The Oregon S49 AdvanceCut is a 14-inch, 3/8 low-profile chain with 49 drive links and a .050 gauge, the standard setup on a lot of small homeowner saws from Craftsman and Poulan. It carries a bestseller rank of #171 and ships sold by Amazon, so returns and fitment questions are simple if you guess wrong. Low-profile chain is forgiving for occasional users because it kicks back less than full-chisel. This is the one I’d point a neighbor to for a small saw they run a few weekends a year.

Same 14-inch length as the S49 but with 53 drive links, the Oregon S53 covers the Remington-pattern saws that take a slightly longer loop on the same bar size. That drive-link count is the detail people miss, so count the links on your worn chain before you order. It’s the smallest discount of the Oregon chains here, but still cheaper than a trip to the dealer. Buy by link count, not just bar length, and you’ll get it right.

The Oregon D59 is a 16-inch chain with 59 drive links, 3/8 pitch and a .050 gauge, listed to fit Homelite and Jonsered among others. AdvanceCut is Oregon’s general-purpose homeowner chain, a good balance of cutting speed and easy filing. At bestseller rank #393 and sold by Amazon, it’s a steady reorder for people clearing their own land. Forty percent off makes a spare loop an easy add to the cart.

This is the standout of the chain lineup. The Oregon 3/8 LP, .043-gauge, 56-drive-link loop for 16-inch bars sits at bestseller rank #17, which is about as high as chainsaw chain gets. It’s the low-kickback replacement for Greenworks, Makita, Ego and DeWalt battery saws, where the thin .043 gauge is common. If your saw runs that narrow groove, this is the chain to grab while it’s marked down. Verify the gauge stamped on your bar first, because .043 and .050 are not interchangeable.

The Oregon H66 ControlCut is another 16-inch chain, listed for Cub Cadet, Echo, Homelite, Makita and Poulan among others. ControlCut sits a step up from AdvanceCut, holding an edge a little longer for folks who cut more than a few cords a season. It’s the lightest discount in this group at under 20% off, so it’s a buy-if-you-need-it rather than a stock-up price. Good chain, just not the deepest markdown on the page.

Step up to an 18-inch bar and the Oregon D66 is the match, with 66 drive links, 3/8 pitch and a .050 gauge. The fitment list is long here, covering Echo, Craftsman, Homelite, McCulloch, Poulan and Stihl. Bigger bar means more chain to keep sharp, so an 18-inch loop rewards keeping a backup on hand. Sold by Amazon at roughly a third off, it’s a fair price for a longer chain.

The Oregon 37977 pairs a 20-inch bar with a matched chain for Craftsman, Echo, McCulloch and Poulan saws. Buying the set takes the fitment math off your plate, since the chain is already counted to the bar. A 20-inch setup is more saw than most homeowners need, so this is for someone running a bigger powerhead on real firewood duty. It’s the priciest item here, but a new bar plus chain bought separately usually costs more. If you’ve been nursing a chewed-up bar, this is the clean reset.

Placeholder